Effect of biochar on fate and transport of manure-borne estrogens in sandy soil

The feasibility of using two types of biochars to reduce steroid hormone pollution from poultry and swine manure application on agricultural land was evaluated.The sorption affinity and desorption resistance of softwood and hardwood biochars were also determined for two estrogen hormones,17β-estradiol(E2) and its primary metabolite estrone(E1).The softwood and hardwood biochars demonstrated high retention capacity for both estrogens.The effective distribution coefficient(K_d~(eff)) of soil-softwood-derived biochar(SBS_(450)) was significantly higher than soil-hardwood-derived biochar(SBH750),indicating the stronger sorption affinity of SBS450 for estrogens.To validate the laboratory results,a field lysimeter experiment was conducted to study the fate and transport of E2 and E1 in soil and leachate in the presence of 1% softwood-biochar(BS450) in topsoil and to compare it with soil without any amendments.The spatio-temporal distribution of both estrogens was monitored at four depths over a 46-day period.The lysimeters,in which the surface layer of soil was amended with biochar,retained significantly higher concentrations of both estrogen hormones.Although they leached through the soil and were detected in leachates,collected at 1.0 m depth,the concentrations were significantly lower in the leachate collected from biochar-amended lysimeters.The result confirmed the efficacy of biochar amendment as a remediation technique to alleviate the manure-borne hormonal pollution of groundwater.     

Use of agricultural waste for the removal of nitrate-nitrogen from aqueous medium

The effectiveness of wheat straw charcoal (WSC) and mustard straw charcoal (MSC) as adsorbents for the removal of nitrate-nitrogen from water has been investigated. Commercial activated carbon (CAC) was used as a standard for comparison. The adsorption effectiveness of MSC was highest followed by CAC and WSC irrespective of the concentration of nitrate-nitrogen in the range of 0-25mg/l. The effects of temperature in the range of 15-28 degrees C on adsorption by WSC and MSC have also been investigated. It was observed that the temperature dependence of the adsorption effectiveness of MSC was higher than that of WSC and CAC. It is concluded that the MSC can be used for the in situ treatment by adsorption of nitrate-nitrogen in underground and surface water.     

Pyrethrins and piperonyl butoxide residues on potato leaves and in soil under field conditions.

Residues of pyrethrin-I (Py-I) and pyrethrin-II (Py-II), the major insecticidal components of the pyrethrum daisy (Tanacetum cinerariifolium) as well as residues of piperonyl butoxide (PBO, a pyrethrum synergist) were determined in soil and on potato foliage grown under field conditions. A pyrethrum formulation (Multi-Purpose Insecticide) containing the three active ingredients was sprayed twice at the rate of 6 lbs of formulated product.acre(-1) ( 5.4 and 27.2 g A.I. of pyrethrin and PBO, respectively) on potato foliage during the growing season. In soil, three management practices (yard waste compost, grass filter strips, and a no mulch treatment) were used to study the impact of surface soil characteristics on the amount of pyrethrins (Pys) and PBO retained in soil. Soil samples and potato leaves were collected at different time intervals after spraying. Samples were purified and concentrated using solid-phase extraction columns containing C18-Octadecyl bonded silica. Residues were quantified by high-performance liquid chromatograph equipped with a UV detector. The first spray resulted in mean initial deposits of 0.18, 0.40, and 0.99 microg.g(-1) potato leaves for Py-I, Py-II, and PBO, respectively. Residues in soil were higher in compost treatments compared to no mulch treatments.     

Hydrogeochemical processes controlling the high fluoride concentration in groundwater: a case study at the Boden block area,Orissa, India

The present investigation reports the assessment of hydrochemical/geochemical processes controlling the concentration of fluoride in groundwater of a village in India (Boden block, Orissa). Boden block is one of the severely affected fluoride-contaminated areas in the state of Orissa (India). The sampling and subsequent analysis of water samples of the study area was carried out following standard prescribed methods. The results of the analysis indicate that 36.60% groundwater F⁻ concentration exceeds the limit prescribed by the World Health Organization for drinking water. The rock interaction with groundwater containing high concentration of HCO₃⁻ and Na⁺ at a higher pH value of the medium could be one of the important reasons for the release of F⁻ from the aquatic matrix into groundwater. Geochemical classification of groundwater based on Chadha rectangular diagram shows that most of the groundwater samples having fluoride concentration more than 1.5 mg L⁻¹ belongs to the Na-K-HCO₃ type. The saturation index values evaluated for the groundwater of the study area indicated that it is oversaturated with respect to calcite, whereas the same is undersaturated with respect to fluorite content. The deficiency of calcium ion concentration in the groundwater from calcite precipitation favors fluorite dissolution leading to excess of fluoride concentration. The risk index was calculated as a function of fluoride level in drinking water and morbidity of fluorosis categorizes high risk for villages of Amera and Karlakote panchayat of Boden block.     

Electrospun ZnO Nanoparticles Doped Core–Sheath Nanofibers: Characterization and Antimicrobial Properties

Coaxial electrospinning technique was used to fabricate the core–sheath composite nanofibers of ZnO nanoparticle (Nps) (10%, 20% w/w) doped polymethyl methacrylate (PMMA) (as sheath) and polyvinyl alcohol (PVA) (as core). Fourier transform infrared (FT-IR) spectra were confirmed the weak forces arise between ZnO Nps, PMMA and PVA matrixes. The hexagonal (wurtzite) structure of ZnO Nps with ~?30.8 nm of diameter was confirmed from the X-ray diffraction pattern. The morphology and microstructure of core–sheath composite nanofibers were confirmed from the scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It is clearly seen from the TEM images that the PMMA encapsulate the PVA core. Core–sheath composite nanofibers were assessed against Escherichia coli (E. coli) and Bacillus subtilis (B. subtilis) bacteria through quantitative, disk diffusion and viable cell count methods. It was found that ZnO Nps doped core–sheath nanofibers were effectively inhibit the growth of gram positive bacteria, B. subtilis.     

Validation of a QuEChERS-based gas chromatographic method for analysis of pesticide residues in Cassia angustifolia (senna)

A simple multi-residue method based on modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged and Safe) approach was established for the determination of 17 organochlorine (OC), 15 organophosphorous (OP) and 7 synthetic pyrethroid (SP) pesticides in an economically important medicinal plant of India, Senna (Cassia angustifolia), by gas chromatography coupled to electron capture and flame thermionic detectors (GC/ECD/FTD) and confirmation of residues was done on gas chromatograph coupled with mass spectrometry (GC-MS). The developed method was validated by testing the following parameters: linearity, limit of detection (LOD), limit of quantification (LOQ), matrix effect, accuracy–precision and measurement uncertainty; the validation study clearly demonstrated the suitability of the method for its intended application. All pesticides showed good linearity in the range 0.01–1.0 μg mL^?1 for OCs and OPs and 0.05–2.5 μg mL^?1 for SPs with correlation coefficients higher than 0.98. The method gave good recoveries for most of the pesticides (70–120%) with intra-day and inter-day precision < 20% in most of the cases. The limits of detection varied from 0.003 to 0.03 mg kg^?1, and the LOQs were determined as 0.01-0.049 mg kg^?1. The expanded uncertainties were <30%, which was distinctively less than a maximum default value of ±50%. The proposed method was successfully applied to determine pesticide residues in 12 commercial market samples obtained from different locations in India.     

Persistence and risk assessment of spiromesifen on tomato in India: a multilocational study

Supervised field trials were conducted at four different agro-climatic locations of India to evaluate the dissipation pattern and risk assessment of spiromesifen on tomato. Spiromesifen 240 SC was sprayed on tomato at 150 and 300 g a.i.?ha^?1. Samples of tomato fruits were drawn at 0, 1, 3, 5, 7, 10 and 15 days after treatment and soil at 15 days after treatment. Quantification of residues was done on gas chromatograph–mass spectrophotometer in selective ion monitoring mode in the mass range of 271–274 (m/z). The limit of quantification of the method was found to be 0.05 mg kg^?1, while the limit of determination was 0.015 mg kg^?1. Residues were found below the LOQ of 0.05 mg kg^?1 in 10 days at both the doses of application at all the locations. Spiromesifen dissipated with a half-life of 0.93–1.38 days at the recommended rate of application and 1.04–1.34 days at the double the rate of application. Residues of spiromesifen in soil were detectable level (<0.05 mg kg^?1) after 15 days of treatment. A preharvest interval (PHI) of 1 day has been recommended on tomato on the basis of data generated under All India Network Project on Pesticide Residues. Spiromesifen 240 SC has been registered for its use on tomato by Central Insecticide Board and Registration Committee, Ministry of Agriculture, Government of India. The maximum residue limit (MRL) of spiromesifen on tomato has been fixed by Food Safety Standard Authority of India, Ministry of Health and Family Welfare, Government of India as 0.3 μg/g after its risk assessment.     

Removal of cyanotoxins from surface water resources using reusable molecularly imprinted polymer adsorbents

Introduction

Microcystins (MCs; cyclic heptapeptides) are produced by freshwater cyanobacteria and cause public health concern in potable water supplies. There are more than 60 types of MCs identified to date, of which MC-LR is the most common found worldwide. For MC-LR, the WHO has established a threshold value of 1???g?L^?1 for drinking water. The present MCs removal methods such as coagulation, flocculation, adsorption, and filtration showed low efficiency for removing dissolved MC fraction from surface waters to the stipulated limit prescribed by WHO based on MC health impacts. The search for cost-effective and efficient removal method is still warranted for remediation of dissolved MC-LR-contaminated water resources.

Materials and methods

Molecularly imprinted polymer (MIP) adsorbent has been prepared using non-covalent imprinting approach. Using MC-LR as a template, itaconic acid as a functional monomer, and ethylene glycol dimethacrylate as a cross-linking monomer, a MIP has been synthesized. Computer simulations were used to design effective binding sites for MC-LR binding in aqueous solutions. Batch binding adsorption assay was followed to determine binding capacity of MIP under the influence of environmental parameters such as total dissolved solids and pH.

Results and discussion

The adsorptive removal of MC-LR from lake water has been investigated using MIPs. The MIP showed excellent adsorption potential toward MC-LR in aqueous solutions with a binding capacity of 3.64???g?mg^?1 which is about 60% and 70% more than the commercially used powdered activated carbon (PAC) and resin XAD, respectively. Environmental parameters such as total organic carbon (represented as chemical oxygen demand (COD)) and total dissolved solids (TDS) showed no significant interference up to 300?mg?L^?1 for MC-LR removal from lake water samples. It was found that the binding sites on PAC and XAD have more affinity toward COD and TDS than the MC-LR. Further, the adsorption capacity of the MIP was evaluated rigorously by its repeated contact with fresh lake water, and it was found that the adsorption capacity of the MIP did not change even after seven adsorption/desorption cycles. The contaminated water of MC-LR (1.0???g?L^?1) of 3,640?L could be treated by 1?g of MIP with an estimated cost of US $1.5.

Conclusions

The adsorption capacity of the MIP is 40% more than commercially used PAC and resins and also the polymer showed reusable potential which is one of the important criteria in selection of cyanotoxins remediation methods.     

Lichens reveal air PAH fractionation in the Himalaya

This paper shows that gas/particulate phase partitioning of polycyclic aromatic hydrocarbons (PAHs) can be monitored using lichens. Anthropogenic sources are responsible for the release of PAHs, which are bioaccumulated in plants at various spatial scales based on their physicochemical properties. Atmospheric PAHs are distributed both in the gaseous and particulate states. Here, a lichen species, Dermatocarpon vellereum Zschacke, has been collected at different altitudes in and around the Rudraprayag valley, located in Central Himalayan region of India, in order to study the spatial distribution of PAHs in the valley. Results show that PAH concentration ranged from 0.136 to 4.96 μg g^?1. Findings reveal that the bioaccumulation of 2- and 3-ringed PAHs was higher in high-altitude samples, whereas bioaccumulation of fluoranthene, a 4-ringed PAH, showed higher concentration in samples from localities away from town centre. 5- and 6-ring PAHs were then confined to the lower altitude at the base of the valley, thus justifying their particulate-bound nature. This is the first report showing the utility of lichen to biomonitor PAHs in the Himalayan ecosystem.     

Lichens to distinguish urban from industrial PAHs

This paper shows that lichens can be used as biomonitors to distinguish urban from industrial polycyclic aromatic hydrocarbons (PAHs). PAHs are atmospheric pollutants originating mainly from incomplete combustion of fuels in vehicles and industry. The occurrence of PAHs in air is a serious health issue in urban areas and industrial areas because some PAHs are carcinogenic. Biomonitoring PAHs with lichens is generally applied for quantification of PAHs. However, the precise sources of PAHs are not well known. Here we use lichen to trace the source of PAHs. PAHs were analyzed in Pyxine subcinerea Stirton, a lichen species collected from twelve sites which vary from urban and industrial to periurban forest area of Haridwar, in the foothills of the Indian Himalayas. Total PAH concentration ranged between 1.25 and 187.3 μg g⁻¹. Results indicate a clear distinction between urban and industrial PAHs profile, using principal component analysis. Lichen sampled from industrial sites exhibited higher concentrations of two-, five-, and six-ringed PAHs, up to 60% of total PAHs, while samples from urban sites were dominated by four-ringed PAHs, predominantly fluoranthene and acenaphthylene. Molecular ratios indicate that combustion was the dominant source of origin of PAHs in industrial area, while urban sites showed mixed origin of PAHs, both pyro- and petrogenic.